|
Cylindrical,
OD/ID, & Universal Grinding
Cylindrical
grinding is also known as "Between Centers"
or "OD" grinding. It is utilized for the
grinding of multiple diameter shafts and parts where
concentricity to the center line or concentricity
between one or more diameters is important. It is
also used for bigger work that exceeds the capacity
of our centerless grinding machines.
OD/ID
& Universal Grinders have multiple grinding wheel
spindles to facilitate the grinding of multiple OD's,
IDs, faces, angles, & radii. Parts can be held
on centers, in a chuck or collet, on a magnet, or
fixtured to a face plate, allowing multiple operations
to be completed in a single setup.
|
Parts
finished by Cylindrical Grinding |
|
CYLINDRICAL
GRINDING CAPABILITY
- Diameters:
to 14" OD
- Lengths:
to 52" (Overall Length)
- Tolerances:
- Diameters
to .0001”
- Roundness
to .00002” (.5 micron)
- Concentricity
to .00004” (1 micron)
- Finishes:
to 2 micro inch
- Multiple
Diameters, Angles, Tapers, & Radii
- All
Materials
OD/ID
& UNIVERSAL GRINDING CAPABILITY
- Diameters:
to 14" OD, 6" ID
- Lengths:
to 40" OD (Overall Length), 8"
ID
- Tolerances:
- Diameters
to .0001”
- Roundness
to .00002” (.5 micron)
- Concentricity
to .00004” (1 micron)
- Finishes:
to 2 micro inch OD, 6 micro inch ID
- Multiple
Diameters, Angles, Tapers, & Radii
- All
Materials
|
Multiple
diameter shaft being
ground between centers
|
